The EVINRUDE E-TEC 175HP Motor is an engine we sell at daigooutboardmotors.com in Sweden. This motor has a V6 66° E-TEC G2 D.I. with a bore x stroke of 3.39 x 3.10 (86 x 78.7). The displacement is 167 (2.7), and the gear ratio is 2.17:1. This outboard motor has a full-throttle RPM range of 5000-6000 and weighs from 496 to 541 (225 to 245).
The starting method is electric, and the controls are ICON II. The fuel induction is E-TEC Direct Injection with stratified low RPM combustion mode, and the alternator output is 133 Amps Total / 50 net Dedicated / 14 amps @ idle. The steering for this EVINRUDE E-TEC 175HP Motor is iSteer DPS | Remote | IHS / Tiebar | Tie Bar / Remote. The trim method is Power Trim & Tilt, and the shaft length is 20 (508) | 25 (635).
Engine Type |
V6 66° E-TEC G2 D.I. |
Bore x Stroke – in (mm) |
3.39 x 3.10 (86 x 78.7) |
Displacement – cu in (cc) L |
167 (2.7) |
Gear Ratio |
2.17:1 |
Full Throttle RPM Range |
5000-6000 RPM |
Weight – lbs (kg) |
From 496 to 541 (225 to 245) – Weight varies by shaft length and steering |
Starting |
Electric |
Controls |
ICON II |
Fuel Induction |
E-TEC Direct Injection with stratified low RPM combustion mode |
Alternator Output |
133 Amps Total / 50 net Dedicated / 14 amps @ idle |
Steering |
iSteer DPS | Remote | IHS / Tiebar | Tie Bar / Remote |
Trim Method |
Power Trim & Tilt |
Shaft Length – in (mm) |
20 (508) | 25 (635) |
Reviews
There are no reviews yet.